Tools

Finish Line's Shop Quality Chain Cleaner is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning, while your hands stay clean. Plus, its rugged plastic construction is virtually unbreakable.

Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step

Wheels Manufacturing Sealed Bearing Extractor - 17mm Fits the following bearings: - 6003 - 6803 - 6903 - 17287

- Awl with round straight blade - Awl with round, 90° bent blade - Awl with round, double bent blade - Awl with round, double bent small blade

- Quickly and accurately determine the wear and stretch of any chain

Topeak's Rocket Ratchet features a fine tooth ratchet mechanism with reverse lever and thumb wheel for quick rotation and control in tight spots and includes hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T10, T25 Torx and #2 Phillips bits, 2 plastic tire levers and magnetic bit holder. It's everything you need in a compact, lightweight package.

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)

- Anti-Loosening, Anti-Corrosion thread prep with PTFE - Two colors offer coating for different spoke lengths

The MT-10, 20, 30 and 40 are high quality folding take-along tools that feature forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation.

- 110 gram, 8-function shop quality folding tool with 1.5, 2, 2.5, 3, 4, 5 and 6mm hex wrenches plus T25 torx wrench. - Super strong composite body features new design with improved comfort, better leverage, and stay-tight bolt design. - Professional-grade tool steel wrenches feature superior anti-corrosion finish for unmatched lasting performance. Pedro's folding wrench sets are essential for the shop, event, ride, and at home. These folding wrench sets feature professional grade tool steel for strength, superior anti-corrosion finish for unmatched lasting performance, and body made of lightweight but super tough composite material. The new body features improved ergonomics, shaped to perfectly fit in your hand, allow easy access to each tool, and with extra length for better leverage and control. In addition, the new stay-tight bolt design keeps tool bits from loosening over time. Backed by Pedro's lifetime warranty.

Checking your chain for wear is one of the simplest things any cyclist can do to maintain drivetrain performance and minimize maintenance costs. The Pedro's Chain Checker Plus II makes this task quick and easy offering a simple check of 50% and 75% chain wear. To ensure the maximum life from your chain and accuracy of measurement, the tool employs a three-point design which properly isolates pin wear from roller wear. Other two-point designs do not and can incorrectly indicate a worn chain, robbing the user of additional miles and money. The Chain Checker Plus II also includes a chain hook tool, perfect for simplifying chain removal and installation, and a chainring nut wrench, essential for removal and installation of chainrings. - Three point chain wear tool design properly isolates pin wear from roller wear - Includes a chain hook tool for simplifying chain removal and installation, and a chainring nut wrench for removal and installation of chainrings - Two chain wear indicators: 50% and 75% - Improved user instructions are laser etched on the tool

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their centering pilots demonstrate their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size pilot: - 49.8mm (for 1.5-inch standard): The 767 is used with the HTR-1 (HTR-1B) and 690XL facer to perform facing only. It fits head tubes with an inside diameter of 49.8mm (1.5" standard). - 43.8mm (for ZS44 and EC44): The 768 Pilot is used with the HTR-1 (HTR-1B), the 750 Centering Cone Adaptor and 690XL facer to perform facing only. It fits head tubes designed for low profile or, “zero-stack,” headsets. These head tubes have nominal inside diameters of 43.9mm. - 55.9mm (for internal 1.5-inch ZS): The 790 Pilot takes the place of the 789 Reamer when performing head tube facing only. The 790 is used with the HTR-1 Headtube Reamer, the 690-XXL Facing Cutter, and the 750.2 Centering Cone Adaptor. The tool allows facing head tubes with 55.95 – 55.90mm I.D. (“Internal” 1-1/2” ZS standard).

World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip.

World-famous Park Tool quality wrapped up in a combination metric wrench. Features both open and 12-point two-way ratcheting box ends. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.

Designed and built to remove and install the lockring that retains front chainrings found on Shimano STEPS e-bike motors. - Fits Shimano STEPS E6100, E7000, E8000 and E9000 e-bike motor systems - For lockrings with 54mm outside diameter and 16 notches - Replacement for Shimano TL-FC39 tool - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - Constructed of 4140 heat-treated steel and plated for long life

Ideal for wheel truing when there’s limited access to spoke nipples such as small, high spoke count wheels or while using an anti-rotation spoke holder. The SW-9 combines two common spoke nipple sizes, 0.127-inch/3.23mm (SW-0) and 0.136-inch/3.45mm (SW-2). Forged, machined, heat-treated, plated and vinyl-dipped for years of dependable use.

The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the 690-XL Facer. The 791 set also includes a pilot that allows a facing-only option of the PF30 frame shell.

The majority of bicycle maintenance is delicate, precision work. But occasionally, getting the job done requires maximum leverage and control. The 8 and 10mm L-Handle Allen Wrench Tools are designed to create optimal torque for pedals and cranks. With an extra deep contact arm, long lever arm and ergonomic handle, having great control during high-torque moments is reassuring. These Allen wrenches also have a convenient ball end for quick turns of a bolt.

They always say, the right tool for the right job. Park's P-handled Torx Wrenches are available in T6, T8, T10, T15, T20, T25, T30 and T40 sizes. They feature offset handles made from durable nylon with a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for excellent durability.

- Blade chrome plated, black anodised tip - Handle – polypropylene

Wall or pegboard mounted holder designed specifically for Park's P-Handle Hex Wrenches. Positions wrenches for easy access with easy-to-read size designation for each tool. Tools sold separately.

The Park Tool FWS-2 Fold-Up Wrench Set combines all the popular hex and Torx compatible wrench sizes of the AWS-10 and TWS-2 into one convenient set. The multi-position shop grade fold-ups are comfortable, lightweight, slip-resistant, and 40% stronger than steel handles. Made in USA.

- For removing/installing cartridge bearings in SRAM X0 hubs and Roam, Rail and Rise wheels

- For removal of cassette-type rear wheel gears - Must be used with compatible cassette lockring tool - Comfortable rubber coated handle improves grip - Fits up to 9sp cassette

Hirobel is a specially designed clamp for bicycle repair stands that makes it easier to work on your bike. It better distributes stresses and loads through the bicycle frame, offering superior stability while eliminating possible crushing or damage to thin-walled and shaped tubing. The pressure clamps used on contemporary workstands were developed for round steel tubing more than 40 years ago, predating carbon fiber, aluminum, aerodynamic and oversized tube shapes, integrated seat masts, dropper posts, and suspension systems. These legacy designs assume your bicycle tubing to be both round and straight, and when it is not, the clamp can impart very high point loads at the clamp edges causing finish damage, internal carbon layup damage, or outright crushing of tubes on the lightest designs. With Hirobel, specially shaped, paint-friendly cones and bindings cradle the frame at the tube intersections, where wall thicknesses are higher and forces can be distributed over much larger surface areas. Adjustable and adaptable for any possible frame design, the Hirobel also allows the repair stand clamp to be located closer to the bicycle center of gravity. This improves stability and eliminates bouncing of the bike during heavier work while also locating the drivetrain consistently higher for the mechanic, improving visibility while reducing back strain.

The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or Seat Roll Premio. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Tredici (Tre-dee-chee) 13 forged and plated tools: Hex 2/2.5/3/4/5/6/8 + Torx 10/20/25 + PH2/Flat + DiscPadSpreader. - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - 98 grams

- Ergonomic forged aluminum side plates. - Black forged Center-Pivot CrV bits wrapped. - Chrome Vanadium steel fastening hardware. - RAP 18/24/25: Cast stainless steel chain breaker with integrated spoke wrenches (HEX 8/10mm wrench, 4 spoke wrenches) - RAP 25: Lightweight aluminum Presta CO2 inflator. - RAP 24/25: Multi-function flat tool (bottle opener, DISC brake wedge, rotor trimming tool) - RAP 6: Hex: 3, 4, 5, 6mm; T25; Phillips - RAP 12: Hex: 2, 2.5, 3, 4, 5, 6, 8mm; T10, T25, T30; Flat; Phillips - RAP 18: Hex: 2, 2.5, 3, 4, 5, 6, 8mm; T10, T25; Phillips; quick link; steel chain breaker - RAP 24: Hex: 2, 2.5, 3, 4, 5, 6, 8mm; T10, T25, T30; Flat; Phillips; quick link; steel chain breaker; bottle opener - RAP 25: Hex: 2, 2.5, 3, 4, 5, 6, 8mm; T10, T25, T30; Flat; Phillips; quick link; steel chain breaker; CO2 inflator; bottle opener - Multi-Tool Weight: 140g - Number of Tools:13

3/8" drive Zyklop bit sockets. - 9-piece socket set on a robust textile belt, 3/8 - For manual and power tool operations (non-impact) - Smooth Twist to Unlock mechanism for a secure fit and simple removal of the sockets - "Take-it-easy" tool finder: color coding by size - Suitable for attachment to a wall, shelf, tool trolley and to the Wera 2go System - 1x Belt B 4 Zyklop socket set, 3/8" drive, 9 pieces - 9x 8790 HMB Zyklop 3/8" socket: 8.0x29.0, 10.0x29.0, 12.0x29.0, 13.0x29.0, 15.0x29.0, 16.0x30.0, 17.0x30.0, 18.0x30.0, 19.0x30.0 - 1x Socket rail B (textile belt), 9 location, unloaded, 45 x 310 mm - 1x Hook and Loop Fastener Strips 30, 200 x 30 mm