Tools/Maintenance

- Replaces original Shimano bleed fitting with easy to use lever reservoir bleed fitting

Brake pad spreader tool for Avid Elixir brakes.

Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes

- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air

Low viscosity mineral oil for use with Campagnolo hydraulic brake systems. - Does not absorb water so regular bleeding is not necessary - Non-toxic and will not irritate skin - Will not damage frame finishes

eeWings - Ti-Prep from Cane Creek.

Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?

- Installs and seats against the inner race of the cartridge bearing for removal (punch from other side of tool against tool flats) - Effectively fits on cartridge bearings with 10-25mm inner race ID's

- For removal (and installation) of chain link pins - Compatible with 7, 8, 9 and 10-speed chains

- Compatible with most 5-to-12 speed chains - Go/no-go gauge indicates 0.75% wear - Reverse side also functions as a chain hook

- For use with majority of Hex bolts found on a bicycle - 4, 5, 6mm Hex

- Gel contains non-Abrasive plastic beads that provide increased surface friction - Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc) - Prevents corrosion/scuffing and quiets creaking noises - Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired - Always follow the manufacturer's torque specifications when clamping carbon parts

- Single 29mm open bore drift for use with 1/2" rods

The majority of bicycle maintenance is precision work, and the Dual-Sided Pick takes things to a whole new level. Ideal for removing debris from tires and brake pads, mud and grit from pedals and cleats, grabbing cartridge bearing and suspension seals, or managing any number of other detail work procedures. The overmolded, file-tread grip provides excellent grip and excellent control. The in-line and angled arm shapes are complimentary for intricate work. Available separate, or found in our Team Edition Tool Kit. - Hardened CRV tool steel shafts resist bending under stress - In-line and 90-degree arm shapes combine to simplify countless precision applications - Overmolded ergonomic file tread grip prevents hand fatigue and promotes excellent control - Ideal for removing unwanted debris from bike accessories and components

The great thing about wax-type lubes is that the shedding action of wax keeps parts cleaner during most riding conditions. Finish Line's Wax Lubricant is a unique formulation that features DuPont's Krytox, a highly advanced, thermally stable lubricant. Its specialized paraffin waxes set up dry and hard to repel grit and grime so your drivetrain runs silky-smooth and stays clean.

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

For a clean, smooth-pedaling drivetrain, look no further than Finish Line's Ceramic Wax Lubricant. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals for maximum durability and convenience. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line! - With each application the ceramic coating is enhanced, ultimately providing the durability of many oil-based lubricants - No wetness or stickiness so dirt and grime will not be attracted or absorbed by the lubricant - Helps avoid abrasive wear allowing parts to run more smoothly and last longer - As the white ceramic particles embed themselves on the chain they will displace grime, causing a grey or black film to form on top of the wax coating. Over 2-3 applications this will lessen or cease. This discoloration is normal and will not compromise performance.

Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

Finish Line's Gear Floss is the ultimate detailing tool, perfect for cleaning your cassette, chainrings, derailleur pulleys, hubs and all those hard-to-reach nooks and crannies. Made with microfiber, it works by attracting and capturing dirt, grease and particles inside its star-shaped grooves. Each package has 20, 20-inch-long ropes that are washable and reusable.

Help your bearings run smoother and longer with Finish Line's Ceramic Grease. Its special blend of ceramic particles, Teflon and synthetic oils helps lube your bearings and dissipate heat, guaranteeing longer life and better function. Plus, it works great on stems, posts, cables and other threaded assemblies, too. - Optimizes performance and efficiency of bottom brackets, hubs and headset bearings - Use on stems, seat posts, cables and any threaded assemblies - Prevents rusting even when exposed to salt water - Clear and non-staining

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Rated "5 Chainrings, Exceptional Grease" by Bicycling Magazine, it's very slick and very tough and lasts as much as 5 times longer than petroleum grease.

- OE replacement kit for Finish Line Pro Chain Cleaner, includes brushes, scrubbers and pins

Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Lubing your bicycle's chain is an essential but messy task. But now, thanks to Finish Line's No Drip Chain Luber, you can oil your chain perfectly without making a mess. Just add your preferred chain lubricant (sold separately) and you'll have your chain lubed in just seconds flat. Not only does it keep things tidy, it saves you chain oil, making sure that not a drop is wasted.

- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings - Prevents wear and distortion in headsets, hubs, and bottom brackets

Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts. - Engineered to rapidly clean disc brake rotors and pads - Acetone-free formula

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air

Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions. - Helps suspension forks run more smoothly and quietly - Made with polysiloxane and advanced fluoropolymers

- Formulated with nano-ceramic boron nitride and surface bonding resins to create an ultra-slick, protective dry film - This film does not absorb abrasive contaminants, which reduces friction, prevents annoying squeaks and premature wear, and repels moisture to prevents corrosion - Sprays on to fully and evenly coat all frictional surfaces - Engineered to ensure fast engagements and smooth releases every time

The great thing about wax-type lubes is that the shedding action of wax keeps parts cleaner during most riding conditions. Finish Line's Wax Lubricant is a unique formulation that features DuPont's Krytox, a highly advanced, thermally stable lubricant. Its specialized paraffin waxes set up dry and hard to repel grit and grime so your drivetrain runs silky-smooth and stays clean.

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant

- Classic design with anti-friction, flare groove rollers for precision cuts - Replaceable, hardened alloy-steel cutting wheel - Hardened steel retractable/lockable deburring blade - Works on 3mm-30mm tubing diameters

- Designed for probing, cleaning, picking, and marking - Three piece includes: 45 degree, 90 degree, and hook tips - Tips constructed from high carbon steel - Extra long knurled aluminum handle/body - 6-1/2" overall length

- Quality alloy construction makes valve core removal and installation a breeze. - Designed for a lifetime of use to keep you rolling for years to come.

- Hardened tool steel. - Chrome plated. - Fits 10, 11, 12, 13, 14, and 15 spoke nipples. - Knurled outside edge provides a sure grip.

- All Purpose Penetrating Lube - Forms A Protective Film On Metal - Provides Excellent Corrosion Protection - Displaces Water - Will Not Harm Plastic Or Painted Surfaces

- Quickly removes grease, oil, and other contaminants from electrical components - Propellant provides maximum spray pressure - Allow hot surfaces to cool before applying - Quick drying, leaves no residue - Safe for most plastics - Citrus scented - VOC compliant

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Metal clips to hold Elite Bleed Kit syringes upright or at 90-degrees - Compatible with both DOT and mineral oil kits - 2 clips per pack

Hydraulic line cutting tools provide precise, repeatable cuts in a convenient handheld package. - Compatible with Jagwire Pro and Sport level hydraulic hose cutters

The Pro Internal Cable Routing Tool uses a rare earth magnet that attaches directly to cables, housing, hydraulic hose, and electronic shifting wire, and can be fed directly though difficult internal setups without the need for a separately routed "lead wire." - This pack includes replacement fittings to attach magnet to cables, housing, hydraulic hose, and electronic wire

- Handy tool to have to easily install your KMC MissingLink. - Easy to handle! - Very comfortable!

Aqua Proof Paste is the magic goop for installing bottom brackets and keeping them quiet. In the Kogel office, it's known as 'Shut up Grease'. Aqua Proof was developed by Morgan Blue from Belgium for the offshore industry. It's saltwater resistant, does not degrade over time, and is a long-time favorite of the UCI world tour mechanics. It works on any pressed or threaded surface to avoid corrosion. You'll find yourself using it for a lot more than just installing bottom brackets. The 5ml size is for a single bottom bracket installation, the 200ml jar will last a long time, even for professional use. - Recommended for all bottom-bracket installations - Also works on thread and headset installation - 5ml syringe is enough for a single installation - 200ml jar for shop use

Lezyne's Power Tire Levers are winning the fight against stubborn tires. They're made of a high-strength composite material for excellent strength and durability. Their thin hook ends easily slip under tight beads, while the large handle gives you the leverage needed for tire removal. On the backside, there is a hook to attach the lever to a spoke for added versatility.

Lezyne's Power Levers are made of fiber reinforced Composite Matrix for increased strength and durability. They're designed with a large handle for comfort, and an integrated spoke hook for versatility. The aggressive hook geometry provides ideal leverage when dealing with difficult tire beads.

Ultra-compact polypropylene case. Kit includes machined aluminum T-handle with combined reamer and insertion tool and five tire plugs. - Weight: 48g

- Designed for a perfect fit on Giant WheelSystems - Safe for use on carbon rims - Ideal size for storage in saddlebags or pockets - Ergonomic shape makes it easy to remove tire - Reinforced nylon for best durability

Whether you own an automotive shop, are a DIY weekend warrior, or are simply cleaning the garage, Scott® Shop Towels are a must in your list of supplies. A multi-purpose towel that’s 2x more durable when wet when compared to the leading value kitchen brand towel and absorbent for cleaning up grease, liquid, oils, and spills. - A disposable shop towel handy for cleaning up oil, grease, and other spills - 55 towels per roll

Put these beauties in your tool kit for quickly fixing flats on the road. - Light weight, low profile lever - Durable composite construction - Easy to get under the tire bead - Set of three levers to assist with hard-to-remove tires - Included cap keeps the set together

Getting a flat is a pain in the butt. It's an even bigger pain in the butt if you don't have the stuff you need to get back home. These patches will help get you back to where you need to be. - Six patches - Sandpaper - Instructions included

Precision brake bleeding tools and adaptor kits for Magura brake systems.

Precision brake bleeding tools and adaptor kits for Magura brake systems. - 30mL graduations

- “New Bike in a Can” - Restore that factory shine - SC1 high gloss coating is specifically formulated to protect and beautify multiple surfaces including plastic, vinyl, rubber and carbon fiber - Water-resistant formulation is safe for use on gloss or matte finishes and makes the clean-up process easier by forming a durable coating that repels mud, dirt and debris

- Biodegradable, non-toxic all-purpose cleaner - Fast-Acting cleaning agents lift away dirt while scrubbing grime and oil deposits - Specially engineered surfactants lower surface tension allowing better penetration and wetting of soils - Tough on dirt, yet gentle enough to use on delicate surfaces including paint, plastic, chrome, anodized finishes, rubber, carbon fiber, aluminum and magnesium - User friendly formula cleanly washes from the surface - Contains no harmful acids, CFC's or solvents.

Superior, all-purpose penetrating lube that displaces water and provides excellent rust and corrosion protection. Unique and proprietary formulation forms a durable film that provides protection against both wear and corrosion. MPPL is the perfect choice for anywhere that a penetrating or multi-purpose lubricant is needed, whether on equipment in the garage, or hinges and locks in the house. For use wherever rusted or corroded parts need freeing, or as a light lubricant. Features: - Prevents rust, corrosion, and wear. - Durable film keeps protecting long after initial application. - Will not harm rubber, plastic, or painted surfaces. - Suitable for use on O, X, and Z-rings. - Great for lubing pedals, shifters, and derailleurs. - Safe on most materials.