Write a Review

Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility, we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line, we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests, smaller increments of movement are achieved – making it simple to fine-tune a rider's position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35a is a straight 35° bend. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g

The Problem Solvers BB30/Press-Fit 30 Adapter Kit consists of DuPont Delrin (a tough, light type of plastic) pieces that allow you to use your external bottom bracket-style crankarms (24mm spindles, such as a Shimano Hollowtech II crank) with newer BB30 and Press-Fit 30 bottom brackets. Please contact us if you have any questions about compatibility.

The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.

The Problem Solvers Sheldon Fender Nuts are an awesome way to avoid the brake-centering problems caused by mounting fenders directly to your brakes. They're named after the inventor and bike guru, Sheldon Brown. These special Sheldon nuts take the place of your existing brake nuts. They have threaded extensions for standard 6mm bolts (sold separately) providing a secure mounting place for your fenders that won't mess with your brake adjustment. They make it easier/faster to install and remove fenders, too, so they're great for commuting bicycles.

For top comfort, Planet Bike's Blitzen Shoe Covers are made of windproof fabric lined with microfleece to keep you warm. They boast Velcro closures for easy on/off and reflective accents for safety.

Keep riding all year long! Planet Bike's Borealis Gloves are versatile full-finger models perfect for the demands of cool-weather riding. Made of wind- and water-resistant fabric, they feature Serino palms and breathable liners, too, so they'll keep you dry, warm and comfortable. Plus, the fleece index fingers and thumbs are great for wiping your face. With the neoprene cuffs and the Velcro closures they offer a custom fit, too.

Planet Bike's Comet Shoe Covers are made of neoprene for excellent water and wind resistance and warmth. Plus they have Velcro closures for easy on/off and reflective accents for safety.

- 120tpi casing with Aramid TechBELT puncture protection - SmartEVO compound

- Makes your bike shine like new and keeps it that way. - Biodegradable formula cleans, polishes, and protects in one step. - Also great for dropper posts, suspension, and for seating tire beads. The original bike polish, Bike Lust's proprietary silicone-based formula includes a biodegradable cleaning agent. Bike lust goes on wet, quickly cleaning light dirt and grime as it polishes, and then dries to a beautiful protective coating. Works on any surface or material in one simple step making your bike look like new and future cleaning easier! Also great for dropper posts, suspension, and for seating tire beads. Bike Lust can be used on all types of materials and finishes including carbon fiber and matte finishes. It's also fantastic on tires to help shed mud and dirt as you ride.

The hex wrench is the most common tool needed for the modern bicycle. Choosing the right set can make the difference between good day and a bad day working on bikes. Pedro's L Hex Wrench Set is up to the challenge. They made these wrenches from heat-treated SNCM-V alloy steel to ensure superior strength and long-lasting performance. Pedro's hex wrenches also feature extra length and a round-style end for better leverage and easy access and handling of hard-to-reach bolts. The set includes all the sizes you need in a convenient holder. - Made from heat-treated SNCM-V alloy steel to ensure long-lasting performance - Extra length provides great leverage and access to hard-to-reach bolts - Includes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10mm sizes in convenient holder

Oranj Peelz has quickly and effectively degreased drivetrains for more than twenty years using a unique citrus-based solvent/surfactant blend. Designed specifically for bicycle drivetrain degreasing, the powerful, biodegradable formula penetrates into every surface and quickly loosens and dissolves even the toughest drivetrain grime. The water-soluble formula rinses easily leaving surfaces residue-free. - Unique citrus-based solvent/surfactant blend quickly dissolves away grease and grime. - Low surface tension allows superior penetration allowing the degreaser to remove contamination from all surfaces of the drivetrain. - Biodegradable, water-soluble formula easily rinses away.

This highly insulated glove is optimized for handlebar comfort and confident bicycle control with enough sensitivity to hit every shift. We use 100g Primaloft Gold insulation w/Crosscore technology, which incorporates Aerogel particles for incredible warmth with minimal bulk. The main body fabric provides wind protection with easy articulation and an AX Suede Laredo synthetic leather palm makes the glove as grippy as it is durable. The AmFIB-specific 3D-shaped gel pad provides bar comfort without causing unnecessary bulk. Despite its generous insulation, it is still touch-screen compatible. - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for maximum warmth with minimal bulk - New AmFIB-specific 3D-shaped gel palm pad reduces bulk and improves grip comfort - AmFIB Softshell main body fabric protects from wind and water - AX Suede Laredo synthetic leather palm for durability and great grip - Touch-screen-compatible index finger and thumbs - Back: 96% polyester, 4% polyurethane - Palm: 80% polyester, 20% polyurethane - Lining: 100% polyester - Made in Vietnam

Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam

This lightweight tight is perfect for days that are just a little too cool for a short, but for which an insulated tight would be overkill. Made from our Transfer fabric using 100% recycled polyester, this tight uses the material's natural stretch to reduce seams and increase comfort during even the most dynamic riding. These tights do not have a chamois, allowing you to pull them over your favorite shorts or use them for other cold-weather activities. - SELECT Transfer fabric made with recycled nylon - Reduced paneling and seams enhance comfort - 1" wide plush elastic waistband holds tights in place - BioViz reflective elements for low-light visibility - No chamois: wear over your favorite cycling shorts or alone for other activities - 80% recycled nylon, 20% elastane - Type: Transfer - Reflectivity: Low-light visibility - Made in Vietnam

This classic summer cycling jersey is perfect for big rides and hot weather. Its high-performance moisture-wicking fabric is made with yarns created from recycled plastic water bottles. - Lightweight SELECT Transfer fabric made with 100% recycled polyester - Three rear bellowed pockets - Silicone print rear gripper to hold jersey in-place in aggressive riding position - BioViz reflective elements for low-light visibility - 100% Recycled polyester Made in China - Type: Transfer Dry - Reflectivity: Low-light visibility

Our go-to men's tight is made for those days when comfort depends on consistent warmth. To deliver a great shoulder season riding experience, Thermal fleece fabric insulates and moves sweat, while PI Dry water-shedding technology wards off splashes and light rain. Fewer panels and reduced seaming combine with a stretchier fabric to improve both fit and comfort. And, the material is so stretchy, we've been able to eliminate the zipper from the ankles, improving both durability and comfort. These tights do not have a chamois, allowing you to pull them over your favorite shorts or use them for other cold-weather activities. - Ultra-soft Thermal fleece fabric for pedaling comfort and thermal regulation - Made with recycled material - PI Dry technology for permanent water-shedding performance - Eliminated zippers at the ankles for improved fit and comfort - BioViz reflective elements for low-light visibility - No chamois: wear over your favorite cycling shorts or alone for other activities - 56% nylon, 30% polyester, 14% Lycra elastane - Type: Thermal - Reflectivity: Low-light visibility - Made in Vietnam

This highly insulated glove is optimized for handlebar comfort and confident bicycle control, with enough sensitivity to hit every shift. We use 100g Primaloft Gold insulation w/Crosscore technology, which incorporates Aerogel particles for incredible warmth with minimal bulk. The main body fabric provides wind protection with easy articulation and an AX Suede Laredo synthetic leather palm makes the glove as grippy as it is durable. The AmFIB-specific 3D-shaped gel pad provides bar comfort without causing unnecessary bulk. Despite its generous insulation, it is still touch-screen compatible. Style touches and fit make this piece uniquely for women. - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for maximum warmth with minimal bulk - New AmFIB-specific 3D-shaped gel palm pad reduces bulk and improves grip comfort - AmFIB Softshell main body fabric protects from wind and water - AX Suede Laredo synthetic leather palm for durability and great grip - Touch-screen-compatible index finger and thumbs - Back: 94% polyester, 6% polyurethane - Palm: 80% polyester, 20% polyurethane - Lining: 100% polyester - Made in Vietnam

This lightweight women's cycling tight is perfect for days that are just a little too cool for a short, but for which an insulated tight would be overkill. Made from our Transfer fabric using 100% recycled polyester, this tight uses the material's natural stretch to reduce seams and increase comfort during even the most dynamic riding. A wide waistband makes the fit around the stomach more comfortable, and our breathable Women's SELECT Escape chamois provides in-the-saddle comfort and performance. - Comfortably compressive SELECT Transfer fabric made with recycled nylon - Flattering wide waistband design with elastic-free front panel for superior comfort - Blended thickness Women's SELECT Escape 1:1 Chamois for chafe-free comfort - BioViz reflective elements for low-light visibility - 80% recycled nylon, 20% elastane - Type: Transfer - Reflectivity: Low-light visibility - Made in Vietnam

This classic summer women's cycling jersey is perfect for big rides and hot weather. We've improved the fit with darting across the front and updated the collar for a flattering, feminine look. Its soft, moisture-wicking fabric is made with yarns created from recycled plastic water bottles. - Lightweight SELECT Transfer fabric made with recycled water bottles - Three rear bellowed pockets - Silicone print rear gripper to hold jersey in-place while in an aggressive riding position - BioViz reflective elements for low-light visibility - 100% Recycled polyester - Type: Transfer - Reflectivity: Low-light visibility - Made in China

We made some exciting updates to this consistently best-selling style. The waistband is redesigned to give this short compression through the sides and back, while reducing constriction across the stomach for improved comfort and unrestricted breathing. It’s cut from a fabric made with recycled polyester yarns, and we’ve used the material’s natural stretch to reduce seams and increase comfort while simultaneously creating a stellar fit for even the most dynamic riding. It includes our comfortable and highly breathable Women’s SELECT Escape 1:1 chamois. - Comfortably compressive SELECT Transfer fabric made with recycled nylon - Flattering wide waistband design with elastic-free front panel for superior comfort - Blended thickness Women’s SELECT Escape 1:1 Chamois for chafe-free comfort - BioViz reflective elements for low-light visibility - 8” inseam length (size M) - Available in XXXL - 80% recycled nylon, 20% elastane - Made in China

- The SS and SS+ feature an all-new tread pattern consisting of a smoother, diamond pattern center with more aggressive side lugs. - This tread pattern allows the rider to keep speed going into corners and maintain control throughout any transition a gravel ride could present. - The GravelKing SS incorporates a supple 126 TPI casing with a nylon puncture resistant belt and Panaracer's proprietary ZSG (Zero Slip Grip) compound. - The SS+ uses the same build as the SS but adds a bead-to-bead layer of Panaracer's ProTite puncture material for even more protection against tread and sidewall cuts for those extra demanding courses or rides with sharp flint rock.

All around touring or commuting tire with ProTite protection, Panaracer's best-ever puncture prevention technology. Its comprehensive size range insures that you can find a Pasela for most any usage. Ride it and trust it. - Urban/Commuter tire

- Excellent urban or touring tire - 400D Lite Extra casing cord for a supple and responsive ride - ProTite now provides 25% more puncture resistance over older PT technology - Amber Sidewalls

The RiBMo is the essence of what a good urban tire is. A perfect blend of weight to strength and riding comfort with a proprietary ProTite Tech puncture material. - Urban/Commuter tire - 60-95 PSI

Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - ?Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty

The Portland Design Works Sparrow Cage is made from a single sheet of lightweight 5052 alloy. The Sparrow's wings fold in to securely cradle your water bottle and the cut outs help keep the cage light. Get a Sparrow and make your ride fly. - Constructed of 5052 alloy - Includes two stainless bolts for installation  - Weight: 57g (2oz) - Lifetime PDWarranty

Whether you're traveling by bike or foot, with the lightweight Carrying System your pannier can accompany you on both. When worn, the Carrying System ergonomically adjusts to your back, allowing air to circulate comfortably and keep sweat at bay. When not in use, the Carrying System can simply be rolled up lengthways and stowed inside your pannier without taking up much space. To attach the Carrying System to your pannier, hook the top loops into the pannier's Quick-Lock hooks, and snap the buckles into the base edge protectors of your bag. Additional load control belts even make bags with auxiliary fasteners easy to carry. - Compatible with all panniers with QL1, QL2 and QL2.1 and lower edge protection. - Handle - Small pack size - Minimal weight - Chest strap - Reflective thread on the straps

For all models with the QL3 or QL3.1 system. For the tubes on your bike rack are too large for a standard clamp, these accessory clamps will allow you to easily attach your QL3.1 Mounting-Set to your bike rack. DETAILS: - 1 pair of tube clamps - inserts for bike racks with tube diameters of 11 to 14 mm

Origin-8's Classic Sport Quill Stem is crafted from light and durable forged 6061 aluminum with chrome-plated steel bolts. The handlebar clamp bolt is hidden for a clean look. Different lengths are available for customizing the reach to your handlebars. This sweet stem is 180mm tall from the bottom of the bolt to the top of the stem so that you can raise and lower your bars, too.

Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.