Skip to main content

Write a Review

$1,099.99 $1,299.99 15% Off
Our New A:1R was a process of reduction. The distillation of all its parts to the simplest, most capable, and most efficient combination, to produce a bike that performs far beyond its class. Designed to tackle longer gravel and multi-surface rides the A:1R is built for explorers and all day adventures. The A:1R is equally at home in town or country, beautifully designed, and like all of our bikes, can be fully outfitted with racks, luggage, and accessories to take you around the block or across the country.
$899.99 $979.99 8% Off
We designed and built this bike specifically to make the everyday ride far more than just an everyday ride. We began with our no compromise belief that every Roll bike should be effortlessly quick, forward thinking, and ultimately versatile. Custom geometry was essential to make the C:1 supremely comfortable, whilst swift and extremely agile. Our sculpted streamline frame and bespoke roll: custom riser bars, puts you in a more relaxed head and shoulder position, while still maintaining the most efficient pedal stroke. And whatever your journey, integrated mounting points allow a full complement of accessories and options. The C:1 presented us with the challenge to create an upright, comfortable and confident rider position without sacrificing our performance ideals. A 10 speed (1x10) drivetrain with a single, sequential thumb shifter excels in this set up, for more intuitive shifting, and lower maintenance. The disc brakes on the C:1 provide consistent, assured braking far beyond traditional rim brakes, and although they're hidden, we favor superior sealed bearings throughout for low maintenance and maximum lifespan. The components we use are anything but 'standard'. We're committed to sourcing the best, and if we're not satisfied we design our own. You'll feel a distinct difference in the ride, not because of one exceptional component but the considered combination of them all. We'll custom build this bike specifically for you.
$1,199.99 $1,349.00 11% Off
The GR:1 has been built to travel off the beaten path. We start with our new sealed bearing 650b wheel set, equipped with the light and supple Teravail Rampart 47mm wide gum wall tires, designed for rough pavement, gravel roads and well beyond. We switch to a lower range 34t front chainring as part of our preferred 1x10 drivetrain for greater climbing ability when the road gets rough and goes upwards. Upgraded SRAM level hydraulic brakes provide consistent, confidence inspiring stopping power, without fading over long descents. We love the feel of the premium Brooks Cambium C17 saddle and Cambium grips, that give all weather control and comfort you can settle into for long days exploring in the saddle.
$799.99 $979.99 18% Off
We imagined it, we designed it, and we built it: all that we desired in a flat bar road bike crafted and engineered with superior components and uncompromised by convention or price. An iconic double diamond profile, deceptively fast, and deliberately understated. Ideal for those days when you want to sweat a little, or commute, or maybe both. The S:1 is designed with meticulous attention to detail. Ultimately to get you there discreetly, effortlessly, and very, very quickly. With the S:1 we were determined to refine rider position to achieve superior control, handling, and comfort without sacrificing forward motion. Gender specific sports saddle, our custom roll: flat handlebar and cockpit set up combine to create the most effective and efficient position to transfer power into the pedals. There's a single thumb shifter for intuitive gear changing and a nifty 1x10 drive train that has the range of a traditional 2x9 but without the weight of a front derailleur. Our disc brakes offer performance far beyond traditional rim brakes, and although they're hidden, we favor superior sealed bearings throughout for low maintenance and maximum lifespan. The components we use are anything but 'standard'; We're committed to sourcing the best, and if we're not satisfied we design our own. You'll feel a distinct difference in the ride, not because of one exceptional component but the considered combination of them all. If you like to go faster farther, you'll fall in love with the S:1.
$9.99 - $14.99 $10.00 - $14.99 On Sale
Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes
$34.90 - $34.95 $34.95 On Sale
Super light at only 38g, the Tubo-ROAD-700c makes racing bikes even lighter. It's 70g lighter compared to a standard tube, a decisive success factor both over challenging long distances and when it comes to seconds. Suitable for disc and rim brake wheels.
$15.05 - $17.99 $15.05 - $19.99 Up to 10% Off
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$54.95 $56.95 4% Off
Topeak's Disc-Mount Rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. And, this tubular aluminum rack features tabs that clear most disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger or extra storage room.
$34.95 $39.99 13% Off
Topeak's Rocket Ratchet features a fine tooth ratchet mechanism with reverse lever and thumb wheel for quick rotation and control in tight spots and includes hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T10, T25 Torx and #2 Phillips bits, 2 plastic tire levers and magnetic bit holder. It's everything you need in a compact, lightweight package.
$69.95 - $79.95 $79.95 - $79.99 Up to 13% Off
Seek out aerobic adventure in Tifosi's Seek FC Fototec sunglasses. These lightweight, full-coverage shades boast Tifosi's exceptionally tough Grilamid frames, while their Fototec lenses automatically adjust to the light conditions so you always have the perfect tint. Their open-frame design and large, impact-resistant, polycarbonate lenses offer a wide field of vision while protecting you from debris. Plus, you'll love the hydrophilic rubber nose pads and temples that adjust in all directions and grip better when wet, for a custom fit that stays put.
$44.95 $49.99 10% Off
Allows Thule Yepp Maxi to be quickly installed on any bike with a rear rack with a load capacity of 25 kg/55 lbs. Features: - Fits rear racks measuring 11-17 cm/4.5-6.7 in
$599.99 $749.99 20% Off
Looking for a smart, direct-drive trainer? The FLUX S Smart checks all the boxes: it’s reliable, accurate, silent, strong, and features a heavy flywheel for a very realistic ride feel. Made to help you sweat while cycling with your favorite apps, this bike trainer is the ideal indoor training companion. - Measure your power within 3% error tolerance - Next-to-silent direct drive trainer lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 10% gradient and a max sprint resistance of 1,500 watts - Sturdy design easily allows for riding full-out and standing on the pedals FEATURES Type of trainer: Interactive Smart direct drive with electric brake Magnets: 8 Permanent ferrite magnets & 8 electromagnets Transmission: None Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): 2 LEDs Firmware upgradable: Yes Suitable cassettes: Shimano & SRAM: 8 - 11 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available. Suitable bikes: Race, Tri, & MTB Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct-drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software SPECIFICATIONS Max. power (40 km/h): 1500 Watt Max. incline: 10% Simulation of descent: No Max. torque: 22.1 Nm Max. brake force: 65 N Flywheel: 7kg Mass inertia: 22.8kg (50.3 lbs) Calibration: Spin down Footprint (lxw): 670 x 642 mm (26.4 x 25.3 in) Height: 460mm (18.1 in) Weight: 22.8kg (50.3lbs) Article number: T2900S DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <3%
$12.99 $17.99 28% Off
Flat mount rear adapter for a 160mm rotor
$34.99 $36.58 4% Off
High performance compound for alloy wheels. Improved power and modulation with excellent wet weather stopping power. Fits: - SRAM | Shimano road
$57.99 $58.00 On Sale
Every superhero needs a sidekick. The Sidekick Pouch weaves securely onto a Wald 137 Basket using standard Molle (Modular Lightweight Load carrying Equipment) attachment, or it can be strapped effortlessly to the right-hand side of your bicycle stem. The Sidekick is fit to carry snacks and repair supplies during your ride, and is wide enough for a nalgene water bottle and measures the same height as a basket. Because the attachment mechanism is universal to the Molle system, our Sidekick is the perfect addition to any bag that features Molle webbing.
$57.99 - $58.00 $58.00 On Sale
The Sidekick Stem Pouch is a bicycle bag that fits a water bottle, snacks, and is an ideal bag for your cell phone and essentials. Featuring two mounting systems, the Sidekick attaches to the bicycle stem and handlebars with the three included velcro straps, or piggy-backs to our Kestrel Handlebar Bag, Ardea Pack, and Anchor Hip Pack with MOLLE snap straps. Instantly level up your Wald front basket set-up by hitching on a Sidekick or two. The Sidekick Stem Pouch is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 2 plastic bottles rescued from ocean beaches. Every superhero needs a sidekick. The Sidekick Stem Pouch attaches securely into the nook between your bicycle stem and handlebars. Nobody puts Baby in a corner. The Sidekick Stem Pouch doesn’t only nail it as a bicycle handlebar bag–it’s a winner added to your bikepacking and day-ride bags–our Sidekick features two MOLLE snap straps to allow you to add this clever cylinder to our most popular bike-camping and urban bicycle bags. Attach the Sidekick Stem Pouch to the Kestrel Handlebar Bag, Ardea Pack, and Anchor Hip Pack. Also Features: - Challenge Sailcloth recycled polyester bag cloth ripstop (450D) - Comes with 3 Omni Wrap velcro attachment straps vertical and horizontal daisy chains allow - Flexible attachment to handlebars and stem - Bottom drain hole MOLLE compatible nylon webbing snap straps - Attaches to the following bicycle bags: Kestrel Handlebar Bag, Ardea Pack, Merlin Randonneur Bag, Anchor Hip Pack Attaches and onto a Wald 137 Basket with the snap straps - Features Cyberian Cordlock one-handed open & close drawstring closure
$1,999.99 $1,999.99 - $2,049.00 Up to 2% Off
A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 26 x 2.1" tires with or without fenders
$34.99 - $35.00 $35.00 On Sale
Surly's Knard is a 27.5-inch x 41mm tire with the perfect tread for maximum traction and low rolling resistance. Designed for wherever your path leads, the Knard is the tire you want beneath you as you plot your next adventure.
$14.99 - $26.99 $17.99 - $26.99 Up to 17% Off
• Square taper interface • Only includes left crank
$19.99 - $30.00 $19.99 - $34.99 Up to 14% Off
- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 26 x 2.125
$3.99 - $6.99 $3.99 - $6.99 Up to 26% Off
• Vinyl coated hooks • 9 mm diameter • Black
$9.99 - $13.99 $13.99 Up to 29% Off
- Used for attaching rear racks onto mono stay bikes - Rubber coated steel for all weather durability
$27.99 - $41.99 $27.99 - $41.99 Up to 33% Off
- Forged steel body - Alloy cups - Chromoly spindle - Sealed bearings - Interface: English - Spindle Type: Square Taper JIS - Weight: 290-300 grams
$14.99 - $27.99 $23.99 - $27.99 Up to 40% Off
• Easy-on, easy-off • Available in two chain widths and two colors • Available in six teeth sizes
$19.99 $24.99 20% Off
Help your young ones learn to ride safely by installing Sunlite Training Wheels on their two-wheelers. These wheels roll smoothly thanks to their steel construction with hard rubber tires. They fit children's bicycles with wheel sizes of 12 to 20 inches so you can move them from bike to bike as your kids grow!
$24.99 $25.00 On Sale
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
$2.65 - $31.80 $2.65 - $31.80 Up to 7% Off
Skratch Labs Anytime Energy Bar is made with real ingredients such as fruits, nuts and quinoa. It has enough fuel to power you through endurance workouts and is tasty enough to be used as a snack any time of day.
$1.75 - $49.95 $1.95 - $49.95 Up to 10% Off
Our Hydration Sport Drink Mix was created for a simple purpose - to replace the electrolytes lost in sweat and to provide a little bit of energy when working out, without offending your palate or gut. We initially created this drink because some of the world’s best athletes needed better. Conventional sports drinks made them sick. They were undrinkable - too sweet, over-flavored, and didn’t even replace what was lost in sweat – which defeated the whole purpose, like fighting thirst with more thirst. The best athletes needed something to safely hydrate, something to quench their thirst, and something to help them perform better. So with their help, we reimagined sports drinks, stripping down what used to be a neon-colored carnival to its bare essentials. In the process, we learned that simple wasn’t just better for elite athletes, it was better for everyone who works hard and sweats. The result is a sports drink with minimal sugar (4g per 100 ml) and a ratio of sugar (glucose + fructose) that is optimized for faster absorption, an electrolyte profile that actually matches what is lost in sweat (800 mg sodium, 80 mg potassium, 100 mg calcium, and 80 mg of magnesium per liter), and only real fruit for flavor for a light and refreshing taste that you can drink all day. That’s it - less sugar, the right electrolyte profile, and real fruit. So, if you’ve never met a sports drink you wanted to take home, your luck is about to change. Drink when thirsty. Don't when not. Repeat as necessary. Ingredients: Lemon & Lime: Cane Sugar, Dextrose, Sodium Citrate, Citric Acid, Magnesium Lactate, Calcium Citrate, Potassium Citrate, Lemon Oil, Lime Oil, Lemon Juice, Lime Juice, Ascorbic Acid (Vitamin C). --Verified Non-GMO, Gluten Free, Dairy Free, Vegan and Kosher Oranges: Cane Sugar, Dextrose, Sodium Citrate, Citric Acid, Magnesium Lactate, Calcium Citrate, Orange Oil, Potassium Citrate, Orange Juice, Ascorbic Acid. --Verified Non-GMO, Gluten Free, Dairy Free, Vegan and Kosher Matcha & Lemon: Cane Sugar, Dextrose, Sodium Citrate, Citric Acid, Matcha Green Tea, Magnesium Lactate, Calcium Citrate, Potassium Citrate, Lemon Oil, Lemon Juice, Ascorbic Acid (Vitamin C). Contains about 16 mg of naturally occurring caffeine from the Matcha tea (per 16 fl oz.). For comparison, an 8oz cup of coffee has 70-100 mg of caffeine. --Verified Non-GMO, Gluten Free, Dairy Free, Vegan and Kosher Fruit Punch: Cane Sugar, Dextrose, Sodium Citrate, Citric Acid, Magnesium Lactate, Calcium Citrate, Potassium Citrate, Apricot, Pineapple, Passion Fruit, Tangerine Juice, Raspberry Juice, Ascorbic Acid (Vitamin C), Malic Acid. --Verified Non-GMO, Gluten Free, Dairy Free, Vegan and Kosher Strawberry Lemonade: Cane Sugar, Dextrose, Sodium Citrate, Citric Acid, Strawberry Powder, Magnesium Lactate, Calcium Citrate, Lemon Oil, Potassium Citrate, Lemon Juice, Ascorbic Acid. --Verified Non-GMO, Gluten Free, Dairy Free, Vegan and Kosher Pineapple: Cane Sugar, Dextrose, Sodium Citrate, Citric Acid, Pineapple, Magnesium Lactate, Calcium Citrate, Potassium Citrate, Ascorbic Acid. --Verified Non-GMO, Gluten Free, Dairy Free, Vegan and Kosher Raspberry Limeade with Caffeine: Cane Sugar, Dextrose, Sodium Citrate, Citric Acid, Raspberry Juice, Magnesium Lactate, Calcium Citrate, Malic Acid, Potassium Citrate, Lime Oil, Green Coffee Extract, Lime Juice, Ascorbic Acid Contains 50 mg of added caffeine from Natural Coffee Berry (per 16 fl oz.). For comparison, an 8oz cup of coffee has 70-100 mg of caffeine. --Verified Non-GMO, Gluten Free, Dairy Free, Vegan and Kosher
$1.95 - $49.95 $1.95 - $49.95 Up to 10% Off
Our Sport Hydration Drink Mix was created for a simple purpose—to replace the electrolytes lost in sweat and to provide a little bit of energy when working out, without offending your palate or gut. We initially created this drink because some of the world's best athletes needed better. Conventional sports drinks made them sick. They were undrinkable—too sweet, over-flavored, and didn't even replace what was lost in sweat—which defeated the whole purpose, like fighting thirst with more thirst. The best athletes needed something to safely hydrate, something to quench their thirst, and something to help them perform better. So with their help, we reimagined sports drinks, stripping down what used to be a neon-colored carnival to its bare essentials. In the process, we learned that simple wasn't just better for elite athletes, it was better for everyone who works hard and sweats. The result is a sports drink with minimal sugar (4g per 100 ml) and a ratio of sugar (glucose + fructose) that is optimized for faster absorption, an electrolyte profile that actually matches what is lost in sweat (800 mg sodium, 80 mg potassium, 100 mg calcium, and 80 mg of magnesium per liter), and only real fruit for flavor for a light and refreshing taste that you can drink all day. That's it—less sugar, the right electrolyte profile, and real fruit. So, if you've never met a sports drink you wanted to take home, your luck is about to change. Drink when thirsty and leaking like a busted fire hydrant. Don't drink while deep in the middle of a Netflix marathon session or sending emails (unless, you're also on your trainer). Meaning, if you haven't earned it, you don't deserve it.
$50.99 - $53.99 $50.99 - $79.99 Up to 36% Off
- Shimano 105 R7000 Series CS-R7000 11-speed cassette - Average weight: 284 g (11-28T), 304 g (11-30T), 320 g (11-32T), 269 g (12-25T) Combinations: - 11 – 28T: 11-12-13-14-15-17-19-21-23-25-28T - 11 – 30T: 11-12-13-14-15-17-19-21-24-27-30T - 11 – 32T: 11-12-13-14-16-18-20-22-25-28-32T - 12 – 25T: 12-13-14-15-16-17-18-19-21-23-25T
$29.99 $34.99 14% Off
The Shimano Altus rear derailleur brings Shadow technology and wide-range capability to 9-speed drivetrains - B tension spring for quick and easy wheel installation and removal - Super low-profile concept with SHADOW mechanism - Wider linkage ensures durability and more precise shifting - Easy adjustment and maintenance - Direct mount compatible - Maximum cog size: 36t - Total capacity: 45t
$29.99 $30.99 3% Off
Shimano's Deore-level 10-speed Chain offers excellent power transfer and top-notch durability. It showcases a mud-shedding design and Shimano's directional design with engineered inner and outer plates for smooth, fast and precise shifting.
$129.99 $130.00 On Sale
The Shimano Deore XT Explorer Dual-Platform Pedals combine the efficiency of the SPD system and the convenience of a platform pedal, all in a lightweight package. - One side SPD, one side platform - Two-sided flexibility and performance - Ideal for trekking - Customize the entry and release tension settings - 392 grams - Concave cleat clearance on platform side - High-grip pins - Sealed cup and cone bearings
$24.99 - $26.99 $24.99 - $29.99 Up to 10% Off
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
$259.99 - $292.99 $269.99 - $292.99 Up to 8% Off
- Rider Tuned Gearing - Wider Gear Combination: 11 – 28T/12 – 28T/11 – 30T (New Gear Combination) - Closer Gear Combination: 11 – 25T/12 – 25T - Lightweight - CFRP & Alloy Spider Arm, 5 Titanium Sprockets - Gear Combination: 11 – 25T, 11 – 28T, 11 – 30T (New Gear Combination), 12 – 25T, 12 – 28T
$279.99 $280.00 On Sale
- Excellent Pedaling Efficiency - Optimized Balance Of Weight And Rigidity - Injection Molded Carbon Composite Body - Hollow Cleat Bolt - Efficient Power Transfer - High Stability - Extra-Wide Platform - Efficient Power Transfer/Durability - Reduces Flex And Pedal Body Wear - Stainless Steel Body Plate - Excellent Pedaling Efficiency - Smooth Rotation - 2-Ball Bearing, 1-Wide Roller Bushing - Reliable Durability Performance - Stable And Uniform Load Distribution - Wide Bearing Placement - Rider Tune - Customize The Entry And Release Tension Settings - Adjustable Entry And Release Tension Settings - Shimano 3-Year Limited Warranty - Average Weight: 224g - Shimano SPD-SL cleats included - Standard (52mm) - Wide (56mm)
$34.99 $44.99 22% Off
Shimano's Dura-Ace Bottom Bracket is perfect for Shimano's Dura-Ace crankset. It features durable composite construction, super-smooth sealed bearings and a plastic sleeve for additional protection.
$24.99 $25.00 On Sale
- Cartridges: forged aluminum cartridge holders with a threaded mounting post and standard-compound pad inserts (M70R2 versions include mounting hardware) - Inserts: replacements for worn Shimano cartridge pads (includes retention cotter pin) - Molded: 1 piece internal backbone pads with threaded post and hardware
$276.99 - $289.99 $289.99 Up to 4% Off
Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)
$44.99 $45.00 On Sale
E-bikes put greater abuse and wear on tires because of heavy frames, battery packs, electric motors, electronics, and of course rider weight and any cargo. Utilizing the same smart inverted tread pattern found on the already popular Drifter series tire, the Serfas E-Drift is constructed using e-bike specific compounds designed to provide a high-mileage long-lasting tire with superior grip, durability, and improved handling characteristics. The E-Drift also features Serfas reliable FPS Flat Protection System and safety conscious reflective sidewalls. - E-bike high mileage compound formulation w/ superior grip characteristics - Inverted tread design reduces rolling resistance for greater speed and handling - 68 durometer center ridge for long life & 58 durometer sides for enhanced cornering capability - Bead: Wire - Pressure: 65psi
$56.99 - $57.00 $56.99 - $60.00 Up to 5% Off
Schwalbe's Marathon Plus is legendary for durability and protection. Their nearly impenetrable 5mm-thick SmartGuard layer almost eliminates flats over the course of the tire's excellent, long life. Whether you're setting out on a cross-country bike tour, cruising on a tandem, or just want peace of mind during your daily commute, the Marathon Supreme is in it for the long haul.
$79.99 $80.00 On Sale
The Supreme was the first Evolution line Marathon and now in its second generation the new OneStar compound makes it even faster. With the new profile it not only looks good, but also rolls more nimbly than ever before. Note: The Marathon Supreme does not have a dynamo lighting strip. - Folding Bead - OneStar compound with V-Guard Protection
$69.00 $89.99 23% Off
SRAM's 500 TT ergonomic brake levers slice the wind and make a great addition to any aerodynamic speed machine. The return springs provide a solid feel and help prevent brake drag, while the aluminum levers offer pinpoint control for maximum stopping power. Plus, the internal cable routing gives a clean look and top aerodynamics.
$44.00 - $49.00 $44.00 - $49.00 Up to 4% Off
Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.
$34.99 - $39.99 $34.99 - $43.00 Up to 7% Off
SRAM's Centra Twist Shifters are simple to use and offer solid shifting and reliable construction. They feature a large ergonomic grip section and SRAM's 1:1 actuation for solid shifts. Plus, with a simple twist of the wrist, you can shift a handful of gears at once.
$66.00 - $71.00 $71.00 Up to 7% Off
SRAM's GX 2x10 rear derailleur provides incredible shifting speed and precision. Exact Actuation technology eliminates slop and shifting variation. Roller Bearing Clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with Cage Lock technology, wheel removal and installation are easier than ever.
$69.99 - $73.00 $73.00 Up to 4% Off
SRAM's 1050 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio and is available in myriad configurations to suit all your riding. There are even models with 36-tooth largest cogs for super-easy climbing.
$93.00 - $101.00 $93.00 - $101.00 Up to 1% Off
SRAM's 1070 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio, a lightweight aluminum lockring, and is available in myriad configurations to suit all your riding. There are even models with 36-tooth largest cogs for super-easy climbing.
$89.99 - $112.99 $89.99 - $112.99 Up to 1% Off
SRAM's 1170 11-Speed Cassette is constructed of light, durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick, positive gear changes. This excellent cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio, a lightweight aluminum lockring, and is available in three ranges to suit all your riding.
$108.00 $109.99 2% Off
Ride anywhere with the wide-range PG-1230, 11- to 50-tooth Eagle cassette. The NX cassette gives riders every bit of the climbing range that the Eagle ecosystem affords with a simple upgrade to splined-drive body wheels. The PG-1230 is the only Eagle cassette designed to be durable enough to withstand the increased demands of E-MTB applications and a perfect solution to heavy-duty use and abuse. Eagle technology provides an expanded, optimum gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents. Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. SRAM guarantees this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact. - Compatible with a splined driver body - Wide 11-50T gear range—a perfect fit for any ride - Optimized gear steps across entire range - 11-50T: 11, 13, 15, 17, 19, 22, 25, 28, 32, 36, 42, 50
$49.99 $50.00 On Sale
SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit bottom brackets would be combined into one captivating package. Pressfit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. Pressfit 30 for road will require a 68mm wide shell while Pressfit 30 for MTB will require a 73mm wide shell. - Easy installation - PressFit cups for lighter weight - Narrow Q-factor and more ankle clearance - Integrated gutter seal to prolong life - Integrated adjuster - 30mm spindle diameter
$25.00 $27.00 7% Off
Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37
$29.99 $32.00 6% Off
SRAM's X4 Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum and steel construction delivers through the roughest trail, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.
$19.99 $20.00 On Sale
SRAM's X4 shifters feature Exact Actuation 1:1 cable pull ratios for precise, dependable rear shifting. They deliver proven ergonomics and excellent performance at a great price.
$19.99 $24.99 20% Off
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.
$19.99 $20.00 On Sale
Easily Mount Any Device The Rokform Universal Adapter is the perfect mounting solution for any phone, camera, or tablet. It can easily be attached to any case or device with its 3M sticky side. Once you've attached the Universal Adapter, you can keep your device where you need it most, and mount to any metal surface or our specialty accessories. #1 Device-Mounting System - The Universal Adapter includes Rokform's signature integrated mounting system (RMS). The RMS gives you the power to mount your device to an assortment of accessories that include bicycles, motorcycles, car dashes, strollers, and golf carts. Roksafe Magnetic Mounting - Since 2011, Rokform has been the pioneers of Safe Magnetic Mounting for iPhone. The Universal Adapter features a Roksafe magnet, which you can use to mount your device to any metal surface or one of our magnet mounts. It is guaranteed safe, and will not affect your GPS, Bluetooth, Wifi, Credit Cards, Apple pay, Data Transfer, or Camera. - Mount almost any phone using Rokform technology, with or without a case - 3M VHB easily adheres to almost any surface - Keep your phone thin - Rare Earth Magnet allows for easy mounting
$41.99 - $83.00 $42.00 - $83.00 On Sale
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
$129.99 - $139.00 $130.00 - $139.00 On Sale
Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.
$159.99 $189.99 16% Off
Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility, we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line, we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests, smaller increments of movement are achieved – making it simple to fine-tune a rider's position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35a is a straight 35° bend. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g
$54.99 $55.55 1% Off
The Problem Solvers BB30/Press-Fit 30 Adapter Kit consists of DuPont Delrin (a tough, light type of plastic) pieces that allow you to use your external bottom bracket-style crankarms (24mm spindles, such as a Shimano Hollowtech II crank) with newer BB30 and Press-Fit 30 bottom brackets. Please contact us if you have any questions about compatibility.
Page 1 of 7 Next page