Saddles

- Rail Material: Titanium - Clamp Style: Standard Rails - Material: Synthetic - Length: 250mm - Width: 146mm - Weight: 194g

The ST3 Superflow is the saddle that maximizes pedaling comfort for longer use. Its anatomical design allows you to easily find your ideal seat, maximizing relief and performance. The gel inserted inside the padding, together with the central Superflow hole for relieving pressure from the perineal area, further increases comfort. The Hi-Viz inserts on the back ensure visibility and safety at night. - SuperFlow technology drastically reduces pressure in the perineal area - Gel padding ensures comfort by adding flexibility in the center of the saddle and absorbing vibrations - Hi-viz reflective inserts on the back improves visibility and safety - Soft-Tek cover, made from a special molded polyurethane, guarantees high levels of comfort - FeC alloy rails, made from high-strength and flexible carbon-iron steel alloy - Selle Italia idmatch S3 - Dimensions: 270 x 160mm - 406g

Comfort and performance within everyone's reach. The ST5 Flow is the perfect saddle for those looking for the right balance between performance and comfort on a daily basis. The Gel inserted inside the padding, together with the central hole, relieves pressure from the perineal area and maximizes comfort. The practically flat shape, on the other hand, ensures the same high level of performance as a racing saddle. Hi-Viz inserts on the back ensure visibility and safety at night. - Flow anatomic cut-out reduces perineal pressure - Gel padding ensures comfort by adding flexibility in the center of the saddle and absorbing vibrations - Hi-viz reflective inserts on the back improves visibility and safety. - Soft-Tek cover, made from a special molded polyurethane, guarantees high levels of comfort - FeC alloy rails, made from high-strength and flexible carbon-iron steel alloy - Selle Italia idmatch S2 / L2 - Dimensions: 276 x 155mm / 276 x 165mm - 396g (155mm) / 403g (165mm)

The T2 Flow makes comfort its main feature. Its wide and ergonomic seat allows any person to ride comfortably, avoiding possible problems in the ischial area. The large layer of gel inside the padding, together with the central hole for relieving pressure from the perineal area, helps to increase comfort in every situation. The Hi-Viz inserts on the back of the saddle also ensure visibility and safety at night. - Wide and ergonomic seat designed to improve comfort - Flow anatomic cut-out reduces perineal pressure - Gel padding ensures comfort by adding flexibility in the center of the saddle and absorbing vibrations - Hi-viz reflective inserts on the back improves visibility and safety. - Soft-Tek cover, made from a special molded polyurethane, guarantees high levels of comfort - FeC alloy rails, made from high-strength and flexible carbon-iron steel alloy - Selle Italia idmatch L2 - Dimensions: 258 x 233mm - 671g

The T3 Flow makes comfort and ergonomics its main features. Its highly ergonomic seat, equipped with a gel, allows you to absorb any imperfections in the road and maximize comfort. The central hole also allows the seat pressure to be adequately relieved from the perineal area. The Hi-Viz inserts on the back of the seat ensure visibility and safety at night. - Wider, comfort saddle, ideal for more upright riding positions - Flow anatomic cut-out reduces perineal pressure - Gel padding ensures comfort by adding flexibility in the center of the saddle and absorbing vibrations - Hi-viz reflective inserts on the back improves visibility and safety - Soft-Tek cover, made from a special molded polyurethane, guarantees high levels of comfort - FeC alloy rails, made from high-strength and flexible carbon-iron steel alloy - Selle Italia idmatch S2 - Dimensions: 267 x 210mm - 480g

- A legendary saddle with an unmistakable shape and a classic look - Full-grain leather cover - High strength, flexible carbon-iron steel alloy 7mm FeC rails - L1: ‚Wide‚ intertrochanteric distance and low pelvic rotation

- Developed in cooperation with Patrick Lange and the BMC-ViFit Triathlon Team to achieve the cutting edge in comfort, aerodynamics, and pedaling efficiency - Triathlon-specific shape with water bottle cage and rack inserts - Superflow cutout for comfort and pressure relief - Titanium Rails and Duro-Tek cover for performance-driven durability - 255 x 135mm - 235g

- Developed in cooperation with Patrick Lange and the BMC-ViFit Triathlon Team to achieve the cutting edge in comfort, aerodynamics, and pedaling efficiency - Triathlon-specific shape with water bottle cage and rack inserts - Superflow cutout for comfort and pressure relief - Carbon rails and Fibra-Tek cover for uncompromising performance - Dimensions: 255 x 135mm - 190g

Available in a Fill & Flow version. Shell in Nylon12 and Carbon fibre, making for superlative performance standards and wonderful weightlessness: 130 grammes : this is as lightweight as it gets. This particular version bespeaks the sheer elegance of hand-upholstered products and the curated charm so typical of items leaving the Selle-Italia laboratories. - Reinforced edges for real world durability - Shock absorber built into carbon rails eliminates vibrations coming up from the road surface - SuperFlow reduces physical limitations from prolonged pressure in the perineal area - Double-density padding for a softer tip for ease of movement with high-density rear for the stability while pedalling - Fibra-Tek microfiber cover - CarboKeramic rails

Shell in Nylon12 and Carbon fiber make for superlative performance standards and wonderful weightlessness: 130 grams. This is as lightweight as it gets. This particular version bespeaks the sheer elegance of hand-upholstered products and the curated charm so typical of items leaving the Selle-Italia laboratories. - Reinforced edges for real-world durability - SuperFlow reduces physical limitations from prolonged pressure in the perineal area - Double-density padding for a softer tip offers ease of movement - High-density rear for stability while pedaling - Fibra-Tek microfiber cover - Ti 316 rails - Dimensions: 268 x 125mm / 268 x 140mm - 165g (125mm) / 175g (140mm)

Excellent performance to live the off-road world to the fullest. The X-LR AirCross Superflow ensures maximum performance by combining unprecedented lightness and solidity. This saddle, specially designed for the off-road world, is equipped with a special? AirCross Tech? technology that guarantees considerable resistance to abrasion and aging and a revolutionary design for a stylish and attractive product. Present in both Fill and Superflow versions, it is composed of a softer inner layer and a waterproof outer layer, achieving the right balance between comfort, strength, and performance. - Reinforced edges for real-world durability - Air Cross dual-layer structure gives a soft inner layer for comfort with a waterproof external layer for protection - SuperFlow reduces physical limitations from prolonged pressure in the perineal area - Double-density padding for a softer tip for ease of movement with high-density rear for stability while pedaling - Manganese rails

Excellent performance to live the off-road world to the fullest. The X-LR AirCross Superflow ensures maximum performance by combining unprecedented lightness and solidity. This saddle, specially designed for the off-road world, is equipped with a special AirCross Tech technology that guarantees considerable resistance to abrasion and ageing and a revolutionary design for a stylish and attractive product. Present in both Fill and Superflow versions, it is composed of a softer inner layer and a waterproof outer layer, achieving the right balance between comfort, strength and performance. - Reinforced edges for real world durability - Air Cross dual-layer structure gives soft inner layer for comfort with a waterproof external layer for protection - SuperFlow reduces physical limitations from prolonged pressure in the perineal area - Double-density padding for a softer tip for ease of movement with high-density rear for the stability while pedaling Manganese rails

- Maintains the typical style of a racing saddle, while maximizing pedaling comfort even in city streets - Gel padding - 255 mm long, 670 g weight

- Embossed top cover - Plastic bumpers - Pivotal system - Clamp Style: Pivotal - Material: Vinyl

The M-D Line was developed for maximum relief of sensitive areas. A pressure distribution product designed by medical experts. The M-D Line stands for Maximized Dip, and in combination with the high classic step shape, distributes the weight of the rider to the sit bones, where it should be. The 602 M-D is for trekking bikes with moderate to upright sitting position. The relief of the perineum area is very high, 80%, which is normally sufficient for age-related, enlarged prostate. Thanks to the proven SQlab active system which allows the saddle to follow the pedaling movements of the rider, comfort is increased, less strain is placed on the inter-vertebral discs and pressure on the sitbones is further reduced. The flex and active movement can be adjusted to the body weight with the comfort sticks in the active damper. The Chromoly struts make the M-D Line suitable for heavier riders. SQlab recommends speaking with your doctor for any problems with your prostate or perenial nerves.

Wider nose and slightly more padding than the 611 model, with 12mm of shock absorbing cushion - Combination of all the Ergowave and ErgoLux advantages, staged shape provides more free space and less pressure - Incorporates SQlab's unique design where the nose drops down away from the rear of the saddle, allowing for 55% of the rider's weight to be transferred to the ischial or "sit bones" - The Active design offers dampened lateral tilt which allows the saddle to follow the biomechanical movement of the pelvis on each pedal stroke (3 interchangeable firmness inserts included) - High-end, aggressive saddle designed for Trail and Enduro riding - Tough upper material, Kevlar reinforced sides, and grip material on the rear of the saddle

The new 6OX Infinergy Ergowave active saddle utilizes BASF Infinergy cushioning (the same material used in running shoes). This material is very robust and brings comfort to a whole new level, especially in off-road conditions, due to its quicker recovery - The cover is not pulled over the entire surface of the saddle as in classic saddles. There are only "tapes" in the important places - Active design offers dampened lateral tilt which allows the saddle to follow the biomechanical movement of the pelvis on each pedal stroke

The weight-optimized 611 Ergowave Carbon was designed to precisely accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. At just 150g, it's the lightest 611 in the Ergowave family. The wave-like shape and raised rear section provide perfect rearward support and an optimal pressure distribution which reaches deep into the body structures to result in improved power transmission. The lowered nose, in combination with the dip, provides optimal pressure relief for the perineal area. For even more pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4mm wider than that of the 612, but just as flat and with the largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places.

The 611 Ergowave CrMo Saddle was designed to precisely accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. The chromoly version provides an economic option for those wanting to experience the benefits of the Ergowave. The wave-like shape and raised rear section provides perfect rearward support and an optimal pressure distribution which reaches deep into the body structures for improved power transmission. The lowered nose, in combination with the dip, provides optimal pressure relief for the perineal area. And for even more pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4mm wider than that of the 612, but just as flat and with the largest possible surface area. The padding was designed for the specific needs on the MTB with better damping properties than the 612, making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. The saddle rails on the non-active versions have been placed slightly closer together to allow for a more flexible shell which mimics the SQlab active technology and allows the saddle shell to follow the biomechanical motion when pedaling. This results in increased comfort, mobilization of the spinal discs and reduced pressure to the sit bones.

The 611 Ergowave S-Tube Saddle was designed to accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. The wave-like shape and raised rear section provides perfect rearward support and an optimal pressure distribution which reaches deep into the body structures for improved power transmission. The lowered nose, in combination with the dip, provides optimal pressure relief for the perineal area. For even more pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4mm wider than that of the 612, but just as flat and with the largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612, making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. The saddle rails on the non-active versions have been placed slightly closer together to allow for a more flexible shell which mimics the SQlab active technology and allows the saddle shell to follow the biomechanical motion when pedaling. This results in increased comfort, mobilization of the spinal discs, and reduced pressure to the sit bones.

Shorter—Narrower—Lighter—Faster. The 612-R Carbon offers more performance based ergonomics from 125g. The raised rear gives more grip and better power transmission. A big advantage on straight roads and especially uphill. The stronger narrower mid-section and the narrow saddle nose gives more legroom. The proven SQlab ERGOWAVE form relieves the soft tissue area and prevents energy-consuming bad posture. The saddle shell is weight and flex optimized down to the last detail. More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. The cover is extremely light but also abrasion-resistant and non-slip. The padding is closed-cell and strongly minimized. The comfort comes from the shape and the flex behavior between rail, shell and foam, which is coordinated as an overall system.

Shorter—Narrower—Lighter—Faster. The 612-R offers more performance based ergonomics from 150 g. The raised rear gives more grip and better power transmission. A big advantage on straight roads and especially uphill. The stronger narrower mid-section and the narrow saddle nose gives more legroom. The proven SQlab ERGOWAVE form relieves the soft tissue area and prevents energy-consuming bad posture. The saddle shell is weight and flex optimized down to the last detail. More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. The cover is extremely light but also abrasion-resistant and non-slip. The padding is closed-cell and strongly minimized. The comfort comes from the shape and the flex behavior between rail, shell and foam, which is coordinated as an overall system.

The M-D Line was developed for maximum relief of sensitive areas. A pressure distribution product designed by medical experts. The M-D Line stands for Maximized Dip, and in combination with the high classic step shape, distributes the weight of the rider to the sit bones, where it should be. The 621 M-D is for city bikes with slight forward lean to upright sitting position. The relief of the perineum area is very high, 85%. Which is normally sufficient for age-related, enlarged prostate. Thanks to the proven SQlab active system which allows the saddle to follow the pedaling movements of the rider, comfort is increased, less strain is placed on the inter-vertebral discs and pressure on the sitbones is further reduced. The flex and active movement can be adjusted to the body weight with the comfort sticks in the active dampener. The Chromoly struts make the M-D Line suitable for heavier riders. The width of 24cm in particular offers a very large contact surface for absorbing even heavy body weight. SQlab recommends speaking with your doctor for any problems with your prostate or perennial nerves.

- The new Allure V2 saddle with updated shape, wider profile, and more defined cut-out. The Allure V2 also gets upgraded to EVA foam to optimize comfort and weight - Increased Flat Forward Profile – Borrowing the proven base of the current Allure, the V2 increases the amount of useable space on the top of the saddle - More Defined Cut-Out – Increased size of the cut-out to add additional soft tissue pressure relief - Updated Graphics and Modernized Shape – The V2 has a completely new shape to better align with current saddle trends. By utilizing the same proven base of the V1, the V2 retains the respected comfort of the current Allure, but in a much more current package - Lightweight EVA Foam – Comfortable, durable, and lightweight EVA foam to provide premium foam - Flat-Forward Platform - Allows ease of movement on the saddle - Nylon Glass Base With Bridge - Increases power transfer - Saddle Dimensions: 260 x 140mm - Saddle Weight: 245g

- I-Beam: lightweight fiber composite single rail integrated into base - Same proven shape as the Patriot, but with additional padding - Wider and thicker nose for better handling characteristics - Full Kevlar cover with embossed graphics for superior durability

- Same proven shape as the Patriot, but with additional padding - Wider and thicker nose for pinching capabilities - Full Kevlar cover with embossed graphics for superior durability

SDG Bel-Air Sport Saddles. The Bel-Air is practical and comfortable with a timeless, clean design for all-day comfort. - Ideal for: Recreational Trail and All-Terrain Trekking - Rear rise platform provides enhanced pelvis rotation and power from a standard position down-curved nose, aids in climbing and prevents snagging - Plush PU foam - Nylon fiber base - 2pc stitched cover - Rail Material: Chromoly - Clamp Style: Standard Rails - Material: Synthetic - Length: 270mm - Width: 140mm - Weight: 320g

SDG Bel-Air Sport Saddles. The Bel-Air is practical and comfortable with a timeless, clean design for all-day comfort. - Ideal for: Recreational Trail and All Terrain Trekking - Rear rise platform provides enhanced pelvis rotation and power from a standard position down-curved nose, aids in climbing and prevents snagging - Plush PU foam - Nylon fiber base - 2pc stitched cover - Rail Material: Steel - Clamp Style: Standard Rails - Material: Synthetic - Length: 270mm - Width: 140mm - Weight: 320g

- comfort, pressure relief groove on top - Synthetic top with Kevlar sides, or microfiber with Cordura sides, generous foam padding - Traditional railed saddle with nylon/carbon base. Nose and tail guards

The Bel-Air V3 saddle borrows the comfort proven profile of the original Bel-Air, but wrapped in an updated package that'll complement any performance driven build. While utilizing the slight rear rise of the Bel-Air, it provides extra support, comfort and power from the seated position for any epic long adventures. The Bel-Air V3 profile is constructed with a free float comfort flex rail inserts, allowing more forgiveness at the wings along with a new hidden cut-out relief to further maximize comfort. - Wider nose to aid in climbing - Sonic Weld construction adds protection on corners of saddle - Deep Peri-Canal provides continuous relief channel from tip to tail - Rear rise allows optimum power and comfort from sitting position - Width: 140mm - Rail Material: Lux-Alloy - Clamp Style: Standard Rails - Material: Microfiber - Length: 260mm - Weight: 236g