Searching...
Ride Brooklyn
 
Park Slope - 468 Bergen St 
(347) 599-1340 
Mon-Fri 10-7, Sat 10-6, Sun 11-6
 
Williamsburg - 50 North 7th St 
(718) 387-2453
Mon-Fri 11-7, Sat 10-6, Sun 11-6
 
 
 
 
 
 
 

Refine By

Availability

Brands

+ more brands

Consumer Reviews

Size

+ more sizes
PayPal
 
> Bicycling Catalog > Accessories > Tools/Maintenance

Tools/Maintenance

961 Results
Per Page 30 60
Finish Line Showroom Polish & Protectant
$8.99 - $62.99

Finish Line Showroom Polish is made with Teflon fluoropolymer and uses DuPont Teflon Surface Protector technology. Provides a brilliant shine plus long term protection on all surfaces of a bicycle. 100% safe for all plastics, rubbers and carbon fiber parts. [more]

Park Tool Campagnolo Power Torque Crank and Bearing Adaptor Set
$62.95

The CBP-5 is used in conjunction with the CBP-3 set to remove and install Power Torque crank arms and right side crank bearings. The CBP-5 includes: • Crank and crank bearing removal adaptor to be used with the CBP-3 Bearing Puller • Power Torque bearing setter • Removal pads for use with carbon… [more]

Wheels Manufacturing Inc. Bench Mount Axle/Cone Ruler
$61.74

- Anodized aluminum construction. Includes mounting hardware - Measures threads for all cones, locknuts and axles - Metric measurement on one side and Standard on the other side [more]

Wheels Manufacturing Inc. Wheels Bench Cartridge/Ball Bearing Ruler
$61.74

- Anodized aluminum construction. Includes mounting hardware - Measures the diameter of loose ball bearings - Measures the inner and outer diameter of cartridge bearings - Metric and Standard measurements [more]

Fabric Chamber Multi-Tool
$60.00

The Chamber multi-tool offers 13 functions from an efficient T-bar head. A smooth finish caddy protects the tools and ensures the tool doesn’t snag jersey pockets or equipment. The T-Bar system increases functionality and ensures that hard to reach areas of the bike are easily accessed. A… [more]

Pedro's Pro Chain Tool 2.0
$60.00

Pedro's Pro Chain Tool 2.0 is a workhorse designed to make chain removal, installation, and adjustments simple, safe, and comfortable. This shop quality screw-type chain tool is ready for years of professional use, and even includes 2 replacement pins stored conveniently in the handle. [more]

Park Tool Pedal Tap (9/16" x 20 tpi)
$59.99

Clean out or restore damaged threads in crank arms with Park Tool's Pedal Taps. They're sold as a set of right and left hand threads. Made of high carbon steel, precision ground, and hardened to stay sharp, they cut easily and fit all conventional tap handles. • Includes a set of 2 taps, 9/16" x 20… [more]

Pedro's Pro T/L Handle Hex Set
$59.99

The hex wrench is the most common tool needed for the modern bicycle. Choosing the right set can make the difference between good day and a bad day working on bikes. Pedro's Pro T/L Hex Wrench Set is up to the challenge and offers features you won't find anywhere else. They started by choosing… [more]

Full Windsor The Breaker Cycle Multi Tool
$59.95

Featuring a chain breaker with a tool-grade stainless steel pin. The Breaker uses the tool bit extender as a handle, giving you the functionality of a workshop chain breaker in a multi tool. A magnetic tool bit slot is located in the tool's end allowing the tool to be used like a screw driver. The… [more]

Park Tool Internal Cable Routing Kit
$59.95

Take the guesswork out of installing cables, wires, and housing inside the frame. The IR-1 speeds the internal frame routing of electric wires, shift cable/housing, brake cable/housing, and hydraulic tubing on carbon fiber, Ti, and aluminum frames. The Internal Cable Routing Kit includes three… [more]

Park Tool Sliding Through-Axle Adapter
$59.95

Park's Sliding Through-Axle Adapter converts their PRS-20, PRS-21 and PRS-23 repair stand (sold separately) to accept 15mm and 20mm through-axle wheeled bikes. Use your axle to mount your bike. One side of the adapter is for 15mm axles, the other for 20mm. [more]

Park Tool Sliding Thru Axle Adaptor
$59.95

The 1729-TA Sliding Thru Axle Adaptor is designed to allow any Park Tool PRS-20, PRS-21 or PRS-23 Repair Stand to accept 12mm and 15mm thru axle wheeled bikes. [more]

Park Tool Tire Seating Tool
$59.95

Park's Tire Seating Tool is designed to quickly seat the bead on stubborn tires. During inflation some tire beads can slip below the rim edge and become difficult to pull out and align. The PTS-1 comes to the rescue with its non-slip jaws and vinyl-coated handles that provide plenty of leverage for… [more]

Specialized S-Works Zee Cage w/ Multi-tool
$59.95

Specialized's Zee Cage integrates an EMT Cage Mount multi-tool, easily allowing riders to combine hydration and repair equipment in an amazingly clean, tidy solution. The cage is available in either a right- and left-hand bottle load, perfect for full suspension and smaller frames. [more]

Topeak All Speeds Chain Tool
$59.95

Perfect for trailside repairs and for your home shop, Topeak's All Speeds Chain Tool is compatible with all chains and removes and installs pins with ease. It's even compatible with 11-speed, hollow-pin chains. [more]

Snap-on Bahco Hacksaws
$59.94

- Professional Ergo: features an ergonomic design with a high blade tension for straight accurate cuts (accepts 12" blade only). Alternative 55 degree blade mounting for flush cutting. Single touch spring loaded blade release mechanism for blade changes. [more]

Park Tool Digital Caliper
$57.95

What's your seatpost size again? Park's Digital Caliper accurately measures seatposts, head tubes, bearings, spoke diameters, etc. It's a precision instrument built accurate to 0.01mm with a stainless-steel mechanisms and a rugged composite body. The tool’s ability to measure in metric, decimal… [more]

Park Tool Frame Alignment Gauge
$57.95

Many bicycles will not shift or track properly because the front and rear wheels are not in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop outs of the frame may be misaligned. For years the accepted method to… [more]

Park Tool P-Handled Torx Wrench Set
$57.95

Park's Torx Wrench Set includes T-handled T6, T8, T10, T15, T20, T25, T30 and T40 Torx wrenches with offset handles made from durable nylon in a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for exceptional durability. Plus, this set of super tools comes with… [more]

ProGold Bike Shine
$15.90 - $56.99

- Consumer grade water-based silicone bicycle polish - Safe on all parts including carbon - Protects against uv rays, water and dirt [more]

Finish Line Ceramic Wax Lube (32-ounce Bottle)
$55.99

Finish Line’s Ceramic-WAX is an advanced wax-based lubricant featuring nano-sized platelets of ceramic boron nitride and micron particles of fluoropolymer. Ceramic WAX creates a coating with an extremely low coefficient of friction. Every time Ceramic WAX is applied, the ceramic coating is… [more]

Park Tool Truing Stand Upright Extension
$55.95

Park's Truing Stand Upright Extensions are made of durable chrome-plated steel and have quick-releases so they install in seconds to your Park TS-2 Professional Truing Stand (sold separately). The Uprights allow the stand to be used with wheels with hubs up to 160mm wide (found on some tandems and… [more]

SRAM Disc Brake Bleed Kit with Hydraulic Fluid
$55.00

SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: • 2 syringes/fittings • bleed blocks • Torx tool • Crow's foot •… [more]

Park Tool Multi-Tool
$23.95 - $54.95

The MT-10, 20, 30 and 40 are high quality folding take-along tools that feature forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation. [more]

Park Tool Wheel Alignment Gauge
$54.95

For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Wheel Alignment Gauge (also called a dishing tool) is a must. It allows you to easily check centering on road, mountain and BMX wheels from 16 to 29… [more]

Park Tool Chain Whip Pliers
$53.95

• Secure engagement, easy to use, and fast! • The CP-1 quickly grips cogs from 9 to 24 teeth with no manual adjustments • A great shop tool, the CP-1 is 13.7" (35cm) long and can be used with one hand to hold cassettes solidly during lock ring removal • Forged steel construction with a spring… [more]

Park Tool Rivet Peening Tool for Campagnolo 11-speed chain
$53.95

After pressing the special connecting rivet into a Campagnolo 11-Speed Chain and breaking off the pilot, Campagnolo requires the end of the connecting rivet to be "peened" or "deformed" to prevent chain failure. The precision-machined CT-11 is used to accurately perform this critical process. Note:… [more]

Gates Carbon Drive Gates Belt Tension Meter
$51.99

- Proper belt tension is critical to maintain optimum drive operation (low tension causes belt to skip on teeth, high tension causes excessive wear on belts, cogs and sprockets) - Tool gauges proper tension using a visual red/green indicator - It is recommended to rotate the drive and recheck… [more]

Park Tool Belt Drive Tension Gauge
$50.95

The BDT-2 is a go/no-go style gauge designed to help set the proper tension on most belt drive systems and sizes. Also gauges rear cog parallelism and angularity. [more]

Park Tool Cable Stretcher
$50.95

Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for… [more]

961 Results
Per Page 30 60