Write a Review

Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions

The direct mount chainrings for SRAM cranksets with the 3-bolt mounting interface. They replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in the Drop-Stop B tooth profile, which is optimized for SRAM Flattop chain. It is also compatible with all other 9-, 10-, 11-, and 12-speed chains except the Shimano 12-speed chain. Compatibility: - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that these chainrings are NOT compatible with SRAM 8-bolt direct mount cranksets. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - There is one offset: Standard Road/CX/Gravel: 6mm offset for cyclocross and road crank applications with 47mm chainline - Praxis Works Road/CX cranks use the 6mm offset. - If using a 9-speed drivetrain, use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP B - Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC - Not compatible with 12spd Shimano HG+ chains Recommendations - - Recommend the use of a clutch style rear derailleur for the best chain security. - An L-wrench works best since the crank spindle may contact a socket adapter and prevent it from engaging properly. - Use the same 3 bolts to attach the Wolf Tooth ring or we carry replacement bolts Tech Specs: - Weights: 38T/90g | 40T/106g | 42T/111g - Material: 7075-T6 aluminum - Made in the USA

- Adapts female specific and full suspension frames to be easily hung on car rack carriers - Locking ends ensure a firm hold on the bicycles seat tube and head tube for a secure fit - Makes transporting an unconventional frame by car rack much easier - Extends from 21.5" to 31" eye to eye

Shifting cables for Road/Mountain bikes.

- Complete cable kits for internal three-speed hubs

Shimano STEPS E8000 chainrings are specially designed for STEPS drivetrain systems. - For use with E-Bike rear derailleur system compatible chain - Chainring for 50mm chain line

- Unique link shape allows the chain to be narrower and lighter while increasing strength and providing more tolerance between cogs. - Flattop technology enables a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner and outer plates for faster and more precise shifts - HollowPin construction for increased strength and efficiency

Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.

Park's Four-Sided Spoke Wrenches grip 4 sides of the spoke nipple so they offer an excellent grip and won't slip or round nipples when turning even the tightest spokes and/or aluminum nipples. These popular wrenches also have easy-to-hold vinyl-coated loop handles that are color-coded according to spoke size for easy identification. The loop handle makes them easy to hang on your tool board too.

Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.

- Creates a ceramic coating for incredible durability and long distance performance - Provides ultra low friction for ultimate drivetrain efficiency - Waterproof qualities excelling in wet conditions - 95% biodegradable

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application

The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No

Jagwire's Basics Road Brake Pads feature their tried-and-true all-weather compound for excellent braking and durability.

Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

A gravel cycling shoe with our Powerstrap Velcro closure system for an enveloping fit and an X4 outsole providing targeted stiffness and rubber tread for mixed surfaces. - X4 nylon outsole – with rubber tread, stiffness index 6 - Weight: 292g (size 42- 1/2 pair) - Sizes: 36-48 (37 to 47 also in half sizes) FEATURES - Powerstrap: foot-wrapping Velcro closure designed for an enveloping fit - X4 outsole: targeted stiffness and rubber tread for mixed surfaces

FSA Standard Headset Bearings

JET is a biodegradable bottle made in food-grade squeezable polyethylene. The bottle has a sporty, sophisticated, and practical design that made it possible for us to achieve greater resistance for the bottle body while retaining unaltered its lightness and softness. Distinguished by an elegant and sinuous profile, the JET comes with a contoured bottle body with a smaller diameter for easier and improved handling, insertion, and removal of the water bottle under any circumstance. The standard 74mm diameter of the JET ensures it can be used with all the commercially available cages.

An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm

ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)

Dimension American bottom bracket for one-piece cranks. - Include cups, bearings and cones - 24 tpi

This versatile competition and trail tire is comfortable and sure-footed in the turns. It has good grip and is available with various technologies. - Smoothly rolling tire that adapts to any terrain with its special tread - Suitable for E-Bikes

FOR OFF-ROAD ADVENTURES An ideal off-road helmet for the first rides on uneven terrain. The MoTrip promises a high level of comfort for your rides over hill and dale. The deep fit of the MTB helmet ensures the best possible protection for the head. To make off-road rides more comfortable, the MoTrip is also equipped with the MTB adjustment system. This enable both individual size adjustment and height adjustability using the adjustment wheel at the back of the head. This is a great advantage for ponytail wearers, as they can make room for a ponytail by adjusting the height. Go on off-road adventures with the lightweight and well ventilated bike helmet or alternatively wear it for commuting. - In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Adjustable strap divider - Height-adjustable visor - Ventilation: excellent ventilation through 6 air inlets and 8 air outlets

The Helmet For Young Adventurers Much of a child's life takes place outside and is full of movement. When riding a bike or skateboard, it can't be fast or wild enough. The right helmet is simply part of the package. The Scraper Kid 3.0 is aimed at all young stuntmen and stuntwomen who prefer to spend their free time in the halfpipe or off-road. It's a robust helmet designed explicitly for this purpose and equipped with a variety of ABUS extras to keep comfortable while skirting the edge. Technology: - ABS hard-shell technology - Good visibility thanks to highly luminescent reflectors - Ponytail compatibility: the helmet is ideal for riders with ponytails - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - Excellent ventilation with 4 air inlets and 4 air outlets connected with flow channels - Size adjustment by means of a half ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and form fitting - Zoom Ace Urban: Finely adjustable fit system with handy adjustment wheel for customizable fit Sizing - Small: 51-55cm - Medium: 54-58cm

The Status Downhill/BMX helmet redefines the standards for what a mid-level full-face helmet should be. Incorporating design cues from our championship winning Aircraft helmet, the Status offers elevated performance and comfort at an exceptional value. - Ultra-light design featuring fiberglass shell - Active cooling system maximizes airflow offering maximum ventilation while riding and also while rider is stationary - Washable comfort liner, cheek pads, and chin strap covers - Engineered with 2 shell sizes and 2 EPS sizes to achieve the perfect fit - Compatible with inflatable emergency helmet-release systems - Padded PU chinbar interior for enhanced impact protection - Adjustable visor with light-weight screws - Small = 55 – 56cm - Medium = 57 – 58cm - Large = 59 – 60cm - X-Large = 61 – 62cm

- Standard replacement cantilever/v-brake bosses

- Alloy construction - Great for Cruiser or BMX bar conversions

The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

The Chain Pig II hands-free chain cleaner will change the way you think about cleaning your chain. Just one use with Pedro's latest solvent-free degreasers and you too will become a believer just as so many riders and skeptical pro mechanics have. The Chain Pig II provides a simple, efficient, and effective way to clean the chain without making a mess or wasting valuable degreaser. Each element has been designed to outperform and outlast the competition. The upper and lower bodies are made from super-strong, chemical and impact-resistant plastic and new Chain Pig II features stainless steel button arms, along with other improvements, to further increase durability. The brush wheels, which have the toughest job in any chain cleaner, feature larger diameter bristles optimized for stiffness, effective cleaning performance, and superior durability. The drag-free derailleur hook is a game-changer providing simple use, real hands-free operation, and alignment allowing seriously high run speeds that increase effectiveness and efficiency. The Chain Pig II has also been designed for efficient cleaning and degreaser usage. The system allows effective cleaning using only 1 fluid ounce of degreaser. The stage one brushes effectively pull degreaser up from the reservoir and onto the chain. The chain is then scrubbed from all angles and finally pulled through a large durable sponge that wicks excess and contaminated fluid from the chain minimizing mess and dripping. The sponge also wipes the chain, filtering larger contaminants, and returning usable degreaser back for more cleaning. - Pro-grade brushes and super absorbent sponge eat chain grime for breakfast, and are always hungry for more - Surgically enhanced with stainless steel hardware and body sculpting ready for epic drivetrain battles - Innovative quick-lock closure and drag-free derailleur hook for easy use and hands-free operation - Lean and mean, this hog requires only 1oz of degreaser

- Makes drivetrain cleaning quick, easy, and safe. Perfect in the Chain Pig! - Incredibly effective pre-activated formula quickly removes oils, soils, and grime. - Safe on any material, biodegradable, solvent-free, plant-derived, and zero-VOC. Developed specifically for our grime-devouring Chain Pig chain cleaner, Pig Juice is an impressively effective and economical degreaser/cleaner that makes bicycle drivetrain cleaning quick, easy, and safe for anyone from novice to professional. Pig Juice features an advanced pre-activated formula that quickly penetrates & loosens, removing oils, soils, and grime with less scrubbing & rinsing, and leaves spotless residue-free parts. Free of harsh chemicals, gentle enough to use on any material, fully biodegradable, fragrance-free, dye-free, solvent-free, plant-derived, and zero-VOC.